eptfe不織布ファブリック

eptfe不織布ファブリック
製品説明:
抵抗:-150度〜300度
​​Breathability:​​ >10,000g/m²·24h
​​Hydrostatic Pressure:​​ >20、000mmh₂o
空気透過性:<1cfm
孔密度:9b/in²
厚さ:30-50μm
重量:100-300 g/m²
引張強度:30n/mm
涙の強さ:5n/mm
UV抵抗:upf 50+
お問い合わせを送る
説明
技術的なパラメーター

Expanded polytetrafluoroethylene (EPTFE) nonwoven fabric is made by nano-fiberizing PTFE resin through a biaxial stretching-fiberization process to form a 0.1-10μm three-dimensional interconnected fiber network. It combines the high porosity (>EPTFEの化学的不活性/熱安定性を備えた不織布の90%)。高精度のろ過、医療隔離、産業保護のために特別に設計されており、ISO 9073不織布ファブリック標準とFDA 21 CFR 177.1550食品連絡先安全性認証を満たしています。

 

EPTFE nonwoven fabric

製品の利点

 

ナノファイバーネットワーク構造

​​​Gradient fiber distribution​: 0.1μm ultrafine fiber on the surface to block particles, 1μm fiber in the middle to regulate flux, and 5μm fiber on the bottom to strengthen support (filtration efficiency>99.99%、ASTM F2299)。
​Self-reinforced structure​: Fiber node melt bonding (hot pressing temperature 300-350℃), anti-delamination strength>50n/cm(ISO 9073-3)。

 

多機能複合設計

​​Antibacterial/antiviral​: Surface grafted quaternary ammonium salt/copper oxide nanoparticles (ISO 20743 antibacterial rate>99.9%), virus filtration efficiency (VFE)>99.99%(ASTM F2101)。
導電性/抗抵抗性:カーボンナノチューブコーティング(表面抵抗<10⁶Ω, EN 1149), suitable for dust-free clothing in electronic workshops.

 

極端な環境への適応性

​​High temperature sterilization resistance: Strength retention >121度 /30分の高圧蒸気滅菌後の95%(ISO 11607-1)。
放射線老化耐性:原子力産業シナリオに適した100KGY照射(ASTM D638)後の繊維構造の分解なし。

 

私たちの工場

 

私たちの工場は、10年以上にわたってE-PTFEと複合材料の生産に焦点を当ててきました。原材料を厳密に選択し、生産を厳密に制御し、品質を厳密に検査します。 R&Dをカスタマイズし、サプライヤーと長期的な協力を得ることができるプロのR&Dチームがあります。最適化されたプロセスと大規模な自動生産により、コストを削減します。私たちは、高品質でカスタマイズされた製品と専門的で集中的な態度で、市場の信頼を獲得しました。お客様に注文を相談し、配置するように心から招待します。

Kaili eptfe equipment
Kaili eptfe factory

 

人気ラベル: eptfe nonwoven Fabric、china eptfe nonepven Fabricメーカー、サプライヤー、工場, PTFEボールバルブシートPTFE

お問い合わせを送る
今すぐRFQを開始してください。
お問い合わせ